Growth and Characterization of Semi-Insulating GaN Films Grown by MOCVD

来源 :稀土学报(英文版) | 被引量 : 0次 | 上传用户:yangyiwenabc
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
High resistivity unintentionally doped GaN films were grown on (0001) sapphire substrates by metalorganic chemical vapor deposition. The surface morphology of the layer was measured by both atomic force microscopy and scanning electron microscopy. The results show that the films have mirror-like surface morphology with root mean square of 0.3 nm. The full width at half maximum of double crystal X-ray diffraction rocking curve for (0002) GaN is about 5.22 arcmin, indicative of high crystal quality. The resistivity of the GaN epilayers at room temperature and at 250 ℃ was measured to be approximate 109 and 106 Ω·cm respectively, by variable temperature Hall measurement. Deep level traps in the GaN epilayers were investigated by thermally stimulated current and resistivity measurements.
其他文献
Comparing and analyzing some volume deformation measuring means for cement-based materials at home and abroad, a continuous online monitor of cement-based mater
The aim of this study is to show how fractal analysis can be effectively used to characterize thetexture of porous solids.The materials under study were carbon
This study describes the development of novel protocols extending the real-time ultrasonic reflectometry(UTDR) for the detection of membrane fouling in hollow f
A new inverse method by coupling iSIGHT and ABAQUS was proposed to determine the constitutive parameters of Al2O3sf/LY12 composite deforming at elevated tempera
A two-component waterborne polyurethane (2K-WPU) was prepared by mixing water-soluble acrylic resin and hexamethylene diisocyanate biuret, and then diluted for
SiC-Al2O3 composite powder was prepared by sol-gel and carbothermal reduction method. The powder synthesized was characterized by X-ray diffraction(XRD) and sca
The isothermal precision forging was applied for the purpose of forming aluminum alloy with complex shape. The complexity of forging is easy to lead to the occu
Nickel-iron nanocrystalline alloys with different compositions and grain sizes were fabricated by electroplating for MEMS devices. The iron content of the depos
A kind of fluorescent sensing coating was prepared for monitoring corrosion of aluminum alloys by incorporating phenylfluorone(PF) into acrylic paint as sensing
Er3+ doped transparent oxyfluoride glass ceramics containing LaF3 nanocrystals were prepared and the up-con-version and near infrared luminescence behavior of E