Ultrafast optoelectronic technology for radio metrology applications

来源 :系统工程与电子技术 | 被引量 : 0次 | 上传用户:maciqian
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Ultrafast optoelectronic technology has been widely used in terahertz time domain spectrum,terahertz imaging technology,terahertz communication and so on,and groat progress has been achieved in the past two decade.Recently,this innovative technology has been applied in radio metrology and supplied a potential and hopeful method to solve the existent challenges of calibration devices and equipments with bandwidth up to 100 GHz.This paper generally summarizes the emerging applications of the ultrafast optoelectronic technology in radio metrology.The main applications of this technology in calibrating broadband sampling oscilloscopes,the high-speed photodiodes and calibrating the electrical pulse generators are emphasized,and the testing of monolithic microwave integrated circuits is also presented.
其他文献
This paper is concerned with the diffusive Nicholsons blowflies equation with nonlocal delay incorporated as an integral convolution over the entire past time u
Perovskite-type oxygen-permeable membrane reactors of BaCo0.7Fe0.2Nb0.1O 3 -δ (BCFNO) packed with Ru-based catalyst had high oxygen permeability and could be u
The hot-compression of Al-1Mn-1Mg (mass fraction, %) alloy sample was carried out on a Gleeble-1500 thermo-simulator at deformation temperatures from 320 to 400
CdZnTe wafers were machined by lapping and mechanical polishing processes, and their surface and subsurface damages were investigated.The surface damages are ma
住宅消费的满足程度不仅取决于自身的居住空间,还受到邻居行为、社区公共环境等影响。分析了住宅消费外部性产生的原因和影响,提出了治理住宅消费外部性的相关对策。 Satisf
The electromechanical properties of metallic single-walled carbon nanotubes (SWCNTs) in the electric field are demonstrated with a column shell model in this pa
The bulk metallic glassy (BMG) rods of [(Fe0.5Co0.5)0.72B0.192Si0.048Nb0.04]100-xYx (x=0-6) and [(FexCo1-x)0.72B0.192Si0.04]Nb0.04]96Y4 (x=0.5-0.8) were prepare
The factors involved in simulating the continuous casting process of steel and the effects of the factors on the thermal behavior were investigated. The numeric
Nanocrystalline single-phase alloys with the nominal compositions (at%) of Nd12.3-xDyxFe79.7Zr0.8Nb0.8Cu0.4B60 (x=0, 0.5,1.5, and 2.5) were prepared by melt-sp
With the experiment and finite element simulation, the influences of power ultrasonic on the solidification structure of 7050 aluminum alloy ingot in semi-conti