论文部分内容阅读
玩了超低音音箱这么久,我一直以来在连接超低音音箱的线材上都不怎么给力,都是跑到旧货市场去淘一些几块钱一斤的工程线材回来,然后自己再接上接头就做成一条超低音信号线了。我不肯花钱的原因是觉得超低音信号线所传输的频响并不宽,认为普通的线材都已经很够用了。后来在朋友的推荐下,我试用了一条由Oelhbach出品的型号为NF 214 SUB的超低音音箱专用连接线。由于我之前没有使用过这类型的线材,也不知道超低音音箱换上高档线材之后会产生多少变化,因此,我就叫上
Play the subwoofer so long, I have been connected to the subwoofer wire is not how to force, are ran to the flea market to Amoy a few dollars a pound of engineering wire back, and then connect their own connector Made a subwoofer signal line. The reason I would not pay for it is that the frequency response transmitted by the subwoofer signal cable is not too wide, and I think that ordinary wires are good enough. Later, on the recommendation of a friend, I tried a special subwoofer cable made by Oelhbach NF 214 SUB. Because I have not used this type of wire before, and I do not know how much the subwoofer changes when it comes to high-end wire, so I called it