耙矿绞车在耙矿或耙料工作中,经常会遇到这样两个问题,一是耙矿绞车上的导向架的导滚严重磨损,造成磨断导向架,磨坏钢丝绳;二是导向滑轮的固定和移动很不方便。前段,这两个问题在我矿使用过程中解决得不好,后经过试验改进,现在基本上得到了解决。在试验过程中,我们首先对钢丝绳的严重磨损情况进行了分析,认为目前耙矿绞车上的导向装置设计分布不合理,原因是在采场或料场工作中耙矿、耙料偏角使用多于直线使用, Rake mine winch rake mine or rake material work, often encounter such two problems, one rake mine winch guide rack on the serious wear and tear, resulting in grinding guide frame, worn wire rope; the second is the guide pulley Fixing and moving very inconvenient. In the previous paragraph, these two problems were not well solved in the course of mine use and were finally improved after tests. In the course of the experiment, we first analyzed the serious wear condition of the wire ropes, and considered that the design of the guide device on the rake winch is not reasonable at present. The reason is that the rake is used in the work of stope or yard, Used in straight line,