【摘 要】
：
Compound ceramic coatings on Ti-6Al-4V alloy were prepared for different time by pulsed bi-polar micro-plasma oxidation (MPO) in NaAlO2 solution. The phase comp
【机 构】
：
Department of Applied Chemistry
论文部分内容阅读
Compound ceramic coatings on Ti-6Al-4V alloy were prepared for different time by pulsed bi-polar micro-plasma oxidation (MPO) in NaAlO2 solution. The phase composition was studied by XRD. And the electrochemical impedance spectra (EIS) of the coatings were measured to study the structure of the coatings, combined with the surface morphology. Using the proper EIS interpreting software, the "equivalent circuit" of the coatings was established, and meanwhile fitting values of equivalent element were obtained. The results show that the coating is composed of Al2 TiO5, α-Al2O3 and rutile TiO2, of which Al2 TiO5 is the main crystalline. Increasing the MPO time, the contents of Al2TiO5, rutile TiO2 and α-Al2O3 in the surface of the coating increase. And the EIS analysis and the surface morphology of the coatings illustrates the double-layer structure of the coatings, and the outer layer is loosen and the inner layer is compact. With the increase of the oxidizing time, the surface coarse degree of the coatings and the porosity of the outer layer of the coating are increased while the compactness of the inner layer of the coating is improved.
其他文献
AISI302 stainless steel samples were modified by elevated temperature nitrogen plasma immersion ion implantation at temperature ranging from 330 ℃ to 450 ℃. T
Self-propagating high-temperature synthesis(SHS) is a new kind of material synthesis technique, and has characteristics with respect to low energy consumption,
When a gun fires the diffusion of chemical species from the propellant gas, such as CO, CO2, H2, H2O and N2, into the hot surface through the microcracks forms
The monitoring system design used in anti-corrosion of coating wire of steel in ocean were concerned. A corrosion monitoring system adapting to corrosion observ
Composite layer with nitrocarbonide and sulfide was made on the surface of CrMoCu alloy cast iron by combined treatment of ion nitrocarburizing and sulphurizing
The microstructure, phase transformation, compression property and strain recovery characteristics of equiatomic TaRu super high temperature shape memory alloy
介绍了焚硫炉计算流体动力学(CFD)模型及模型建立中涉及的一些关键因素.利用CFD模型可以更好地理解焚硫炉、焚硫炉与周围管道的关系、焚硫炉对不同硫原料系统或流量的处理能
The tribological characteristics of carbon fiber reinforced polymer composites under distilled-water-lubricated-sliding and dry-sliding against stainless steel
在分析当前石油销售企业成品油流转流程和数量管理体系的基础上,对成品油在各流转环节发生损耗的原因进行了全面具体分析,并以内部控制管理思想为指导,从油品流转的各个环节
A new kind of functionally graded materials (FGM) with density gradient has come to showgreat potentials as flier-plates for creating quasi- isotropic compressi