【摘 要】
：
MgO single crystal was irradiated by neutron up to a dose of 5.74×1018 cm-2. The radiation damage and its recovery were studied by means of UV-VIS and EM spect
【机 构】
：
School of Science
论文部分内容阅读
MgO single crystal was irradiated by neutron up to a dose of 5.74×1018 cm-2. The radiation damage and its recovery were studied by means of UV-VIS and EM spectroscopy. The results indicate that the irradiation generates large amount of optically detectable defects such as single anion vacancies (F+ center), anion divacancies (F2) and some higher order defects. Through isochronal annealing, these defects started a series of processes of diminishing and transforming, and finally all disappeared while annealing at 900 ℃. It seems that the absorption bands of 573 nm are resulted from a higher order and more complex aggregated center than that of 424, 451 nm bands.
其他文献
LiFePO4 thin films were prepared by sol-gel technique. The phase and surface morphology were characterized by X-ray diffraction and scanning electron microscopy
In order to solve the reserve stability problem of pyrotechnic explosives containing magnesium powder,a coating method named rapid expansion of supercritical fl
High Nb containing TiAl alloys with nominal composition of Ti-45Al-9(Nb, W, B) were fabricated at different hot pressing temperatures. The experimental results
SCS-6 SiC continuous fiber-reinforced Ti-Al intermetallics-matrix composites were fabricated by HIP method and then heat-treated in vacuum under different condi
The effects of Zn content on the as-cast microstructure and mechanical properties of Mg-xZn-4A1 alloys containing TiC and rare earth elements were investigated
New liquid free radical-cationic hybrid photopolymer, consisting of acrylate-based photocurable resin and epoxy-based photosensitive resin for stereolithography
The nanostructures of the ball milled FeCo particles were characterized as functions of the ball milling time ( t ) using quantitative X- ray diffraction (XRD),
Continuing the effort to redesign IN718 alloy in order to provide microstructural and mechanical stability beyond 650 ℃, IN718 alloy was modified by increasing
With electron assisted hot filament chemical vapor deposition technology, nanocrystalline diamond films were deposited on polished n-(100)Si wafer surface. The
A new class of electrorheological (ER) material using rare earth (RE=Y) oxide as the substrate, NaNO3-doped Y2O3 materials, were synthesized using Na2CO3 and Y(