三十辊箔带轧机在上海研制成功,于1983年12月5～8日通过鉴定。这台轧机即可采用电气传动,又可采用液压传动,便于客户选用。三十辊箔带轧机的技术性能如下: 轧制材料精密合金工作辊直径 2～3.5 工作辊长度 60～65 mm 最外层支承辊直径 26mm 成品带材最小厚度 0.001mm 成品带材最大宽度 40～15mm 坯料厚度 0.03mm 卷取张力 0.5～50kgf 轧制压力 4.5tf 轧制速度 0～10 m/s 这台轧机具有下述特点: 1.辊系采用辊箱结构,辊子按1、2、3、4、5锥形排列,轧制力分布合理,可大 Thirty-roller foil strip mill was successfully developed in Shanghai and passed the appraisal on December 5 ~ 8, 1983. This mill can be used electric drive, hydraulic transmission can be used to facilitate customer choice. The technical performance of the thirty roll foil mill is as follows: Rolling material Precision alloy Working roll diameter 2 ~ 3.5 Work roll length 60 ~ 65 mm Outermost support roll diameter 26mm Finished strip minimum thickness 0.001mm Finished strip maximum width 40 ~ 15mm Blank thickness 0.03mm Coiling tension 0.5 ~ 50kgf Rolling pressure 4.5tf Rolling speed 0 ~ 10 m / s This rolling mill has the following features: 1. Roll system adopts roller box structure, 4,5 conical arrangement, the distribution of rolling force is reasonable, can be large