Casting defects that are closely related to entrapped air bubbles and metallic oxides occur very frequently in the sand mold casting process. Many researchers have shown that these defects can be reduced by adopting an appropriate gating system design. However, it is difficult for field engineers to identify a specific gating system that is more appropriate for their products. In this study, we tried to draw a comparison between two gating system designs with and without a ceramic foam filter. The ceramic foam filter was added to the horizontal runner just after the down sprue to prevent air bubble generation and reduce turbulence without a change of gating system design. The water modeling experiment was conducted with four different amounts of the initial volumes of water in the reservoir to verify the effects of initial pouring velocity. The results of the experiment applying the filter showed remarkably changed flow characteristics. The use of the filter was found to convert the flow pattern of water in the desired direction. The ceramic foam filter performed well to reduce flow velocity and stabilize the water stream.The flow pattern without a filter can be improved significantly even with the the use of just a 10 PPI irregular filter. Although the study confirmed that use of the filter may change the flow characteristics, it needs to be noted that the use of the ceramic filter alone cannot solve all the problems caused by a poorly designed gating system. Many builders have shown that these defects can be reduced by employing an appropriate gating system design. However, it is closely for the field engineers to identify a specific gating system that is more appropriate for their products. In this study, we tried to draw a comparison between two gating system designs with and without a ceramic foam filter. The ceramic foam filter was added to the horizontal runner just after the down sprue to prevent air bubble generation and reduce turbulence without a change of gating system design. The water of experiment of conducted with four different amounts of the initial volumes of water in the reservoir to verify the effects of initial pouring velocity. apply the filter showed remarkably changed flow characteristics. The use of the filter was found to convert the fl ow pattern of water in the desired direction. The ceramic foam filter performed well to reduce flow velocity and stabilize the water stream. flow pattern without a filter can be improved significantly even with the the use of just a 10 PPI irregular filter. study confirmed that use of the filter may change the flow characteristics, it needs to be noted that the use of the ceramic filter alone can not solve all the problems caused by a poorly designed gating system.