The drying and combustion process in the combined grate and circulating fluidized bed(grate-CFB) municipal solid waste(MSW) incinerator was investigated experimentally and mathematically.The drying grate bed was simulated by a muffle furnace,which could be controlled at a constant tempera-ture level.The kind of wastes,thickness of waste layer fed and temperature were chosen as the ad-justable parameters to study their effect on the drying process.The experimental results indicated that the hydrophilic wastes were more difficult to be dried than the hydrophobic wastes.The higher the temperature is the easier the waste is to be dried.The thinner waste layer is favorable to drying the waste.The pyrolysis experiment in the furnace showed that the higher temperature level could reduce the conversion rate of carbon to carbon monoxide.The semi-empirical mathematical model that in-cluded the bed material distribution submodel,volatile matter release submodel,carbon particle combustion submodel and so on was proposed.A 260 t/d grate-CFB incinerator was modeled and the model predicted bulk density agreed with the measured value from industrial field test.The predicted flue gas(e.g.CO2,CO) concentration deviated slightly from the industrial test data.The parameters and variables used in the model were determined by the experiments or practical field test.This model can be used to design the grate-CFB incinerator and guide its operation. The drying and combustion process in the combined grate and circulating fluidized bed (grate-CFB) municipal solid waste (MSW) incinerator was investigated experimentally and mathematically. The drying grate bed was simulated by a muffle furnace, which could be controlled at a constant tempera -ture level. The kind of wastes, thickness of waste layer fed and temperature were chosen as the ad-justable parameters to study their effect on the drying process. the experimental results that the hydrophilic wastes were more difficult to be dried than the hydrophobic wastes.The higher the temperature is the easier the waste is to be dried the thinner waste layer is favorable to drying the thinner waste layer is favorable to drying the thin. The semi-empirical mathematical model that in-cluded the bed material distribution submodel, volatile matter release submodel, carbon particle combustion submodel and so on was proposed. A 260 t / d grate-CFB incinerator was modeled and the model predicted bulk density agreed with the measured value from industrial field test. The predicted flue gas (egCO2, CO) concentration deviated slightly from the industrial test data.The parameters and variables used in the model were determined by the experiments or practical field test. This model can be used to design the grate-CFB incinerator and guide its operation.