论文部分内容阅读
目的探讨避免纸塑包装器械包压力蒸汽灭菌后湿包的方法。方法将800件器械包均分为对照组和实验组,对照组将纸塑包装器械包竖放于相应的灭菌筐内,纸面对塑面,包与包相互依靠;实验组根据纸塑包装器械的规格选用相应的灭菌筐和活动间隔架,使包与包相对独立,存有间隙,灭菌后观察湿包情况。结果实验组不同种类器械灭菌包湿包率明显降低。结论根据纸塑包装灭菌器械的规格选用相应的灭菌筐和活动间隔架装载灭菌,可以减少湿包发生。
Objective To explore a method to avoid wet pack after pressure steam sterilization of paper-plastic packaging equipment. Methods 800 instruments were divided into control group and experimental group. In the control group, the paper-plastic packaging equipment was placed vertically in the corresponding sterilizing basket. The paper faced the plastic surface, and the packages and packages relied on each other. The specifications of packaging equipment use the appropriate sterilization baskets and activities of the interval shelf, the package and the package is relatively independent, there is a gap, observe the wet package after sterilization conditions. Results In the experimental group, the wet pack ratio of different types of equipment sterilization packs decreased significantly. Conclusions According to the specifications of paper-plastic packaging and sterilization equipment, the corresponding sterilization baskets and movable spacers are used for sterilization, which can reduce the occurrence of wet bags.