论文部分内容阅读
RJX-75-9箱式电炉的炉门原采用滚轮式压紧结构,使用一段时间后,密封性能大大降低,使得距炉口300～400mm的炉底处因温度低而无法利用。现改用螺丝压紧密封结构(见图)解决了炉门密封问题。这种结构关键在于炉门的调整,当松开螺丝时炉门能离开炉面板10～20mm即可。经使用一段时间表明,炉口处的炉温基本上与炉膛温度一致,炉底可全部利用,节
The furnace door of RJX-75-9 box-type electric furnace originally adopts roller-type compression structure, and after a period of use, the sealing performance is greatly reduced, making the furnace bottom 300 ~ 400mm away from the furnace mouth unable to be used due to the low temperature. Now use screw compression seal structure (see photo) to solve the problem of door sealing. This structure is the key to the adjustment of the furnace door, when the screw is released, the furnace door can leave the furnace panel 10 ~ 20mm. After a period of time shows that the furnace mouth furnace temperature basically consistent with the furnace temperature, furnace bottom can be fully utilized, section